SAW STOOLS

LEGS...TO FIT THE LEGS INTO THE HOUSING..YOU MUST CHECK THE HOUSING TO SEE IF THERE WILL BE ANY THING BLOCKING IT FROM GOING IN LIKE BITS OF TIMBER YOU MAY HAVE ON THE SIDES...YOU MUST CUT YOUR LEGS TO THE  CORRECT ANGLE...THEN PUT GLUE ON IT AND NAIL IT IN............

STEPS TO CUTTING THE LEGS TO SIZE...1ST YOU GOT TO MARK OUT YOUR ANGLE CUT 3MMS AWAY FROM IT AND THEN PLANE TILL IT IS FLUSH OR GOOD ENOUGH 4 YOU..

CLEATS...MARK YHE TIMBER USING THE OUTSIDE PARTS OF THE LEGS...CUT 3MMS AWAY FROM THE LINE...THEN PLANE UP TOWARDS THE LINE...TRICKS NOT TO SPLIT THE ENDS...PLANE UP TO THE MIDDLE THEN COME FROM THE OTHER SIDE AND PLANE...

BRACES..........FIRST YOU GOT MARK OUT THE MIDDLE USING THE BRACE AND A RULER...THEN GET YOUR ANGLE USING THE SLIDING BEVEL...CUT 2MMS AWAY FROM THE LINE THEN PLANE TOWARDS THE LINE..KEEP CHECKING IF THE ANGLE IS CORRECT...WHAT WAS TRICKING TO ME ...USE THE PLANE ON IT..USING IT TO GET THE CORRECT ANGLE..I KEPT CHIPPING YHE ENDS OF....TOOLS I USED ON THE BRACES..SAW,RULER,PLANER AND SLIDING BEVEL..........

FINISHING...........I USED A BELT SANDER ON THE TOP AND SANDED ALL PENCIL MARKINGS...